DOWNLOAD LINK for Lamptron SVC01,SVM01,PCBA01,CHIP01 Fan Control Software

fan_controller_ui-20260508.7z
0e671c7029d70a94ff1ab6c0b1b0eed6.7z (10.45 MB)



 
Software Operations

  1. Connect the SV-USB to the 9-pin port on the computer motherboard using a 4-pin USB cable.
  2. Launch the software afterward; the serial port number of the connected device will be automatically detected. If no port is displayed, click the “ Refresh ” button.
  3. Click “Connect ”to establish an automatic connection.
  4. Control operations can be performed in the “Parameter ” Settings section.
  5. Fan data monitoring is available in the “Current Status ” section.